Quantcast
Jump to content

PreCentral: Recovery from 0% battery bug


Recommended Posts

No PowerHave you ever been using your webOS phone, browsing the web or playing a game, knowing that you had plenty of battery left and then all of a sudden the battery level drops to 0%?  And then shortly afterwards, the phone shuts down because it thinks there is no battery left even though you know it has plenty of juice in there?  While this bug doesn't hit often (and seemingly most often on a Pre3), it seems to rear its ugly head at the worst possible times just when you need your phone most. The good news is that there is a rather simple fix for this, the bad news is that it may be a bit inconvenient for you.

Actually, the simplest way to fix this is to swap out the battery with a spare, if you have one. If you don't have an extra battery with you, all you need to do is plug in your device to a power source and leave it plugged in for a bit until the device recalibrates the battery to the correct level. Once your phone turns back on, it will still only show a low battery level, typically under 5%. But if you keep the phone charging, it will eventually jump back up to its "correct" levels. It may slowly charge up to 20% after 10 minutes and then jump to 90%, or it may take 20 minutes and then go back to 100%, or it may only take 5 minutes, but eventually it will return to normal. Here's just hoping that the next time this happens you are close enough to a power outlet to charge up your phone, otherwise you will have a nice paperweight that you get to carry around for a bit.

mf.gif
link hidden, please login to view


a2t.img3sOwMjj-GKU

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Abhishek_02x
      I am using the lg tv from 2 years and I found an amazing experience till now.
      But I like request about Play box TV app. Please add this app in store section so that I could download it on my tv. 
      It would be helpful if you respond to my email. This app is very demanding now a days as it comes with the excitel broadband service.
    • By David Daul
      My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working.  I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote."  Well... this really stinks because the remote doesn't work!!!  I have tried a USB mouse, a new magic remote, other LG Remotes with no luck.  I have also tried using the button on the bottom of the tv.  And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
      This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs.  Does anyone have a trick for getting past this initial screen???
      Thanks for the help.
    • By Matan Faragi
      Hi,
       
      I'm not sure its the right place but at any case i will describe my issue here and maybe you will be able to help:
      Recently I bought a a TV and a sound bar, and i have some issue from the moment i get the TV.
      TV model - LG 55LB679Y with latest firmware version i have at my country (Israel) - 04.30.16
      SoundBar - LG NB4540
      the TV connected to sound bar by "wireless simplink" feature 'LG TV' and TV connected to My Wireless router.
      every 5 - 15 minutes, i have sound drops / Cutoff / stooped / Interruption, seem like the TV loose connection to sound-bar for few seconds or something similar, it's happen from any AV source im using HDMI, USB...
      and the local re-seller replace the sound-bar to a new one (same modal off course) and i didn't help.  
      i have try to troubleshot the problem in the last few weeks - but didn't succeed to solve it, and also the support / costumer service didn't have solution for this.
       
      some steps i take when troubleshot this issue:
      * different wireless configuration on router -  different channels, SSID, Security - issue still persist.
      * another wireless router - issue still persist.
      * working with optical cable to sound bar - just for testing - working ok, but i need the wireless feature working this the reason i bought sound bar and TV from the same manufacturer.
      * disconnect the TV from wireless network - looks like it's working ok, but didn't had chance to test it for long time.
       
      from my point of view looks like it's issue with wireless device on TV not able to to work in parallel with soundbar and wireless network for some reason, It could be caused bysoftware issue on WebOS or Hardware issue with this TV model.
       
      I really hope you be able to help me or throw some light on this case.

      Kind regards,
      Matan
    • By majorusa
      Please post here firmware number for your WebOS set including your country or the country where you downloaded the firmware and the model of your tv set:
      - 3.23.24 - Romania- 47LB730v
      - 3.23.34 - Romania -47LB730v - 21.08.2014 by USB
      - 4.30.09 - Romania - 47LB730v - 29.08.2014 - OTA
    • By David Joseph
      Your browser lags behind in terms of functionality, you can not authenticate the I'm not robot thing. It will take ages trying to verify and fail. It should be java enabled to load more recent websites. Replace it with chrome or what solution do you have 

×
×
  • Create New...