- 0
-
Popular Now
-
-
Similar Topics
-
By Mimiu
As the title says, please fix ASAP playback of Profile 7 (FEL/MEL) inside Matroska (.mkv) container.
On WEB OS 24 it was working with backwards compatibility to HDR10 base layer - in other words the Dolby Vision was omitted.
Currently in WEBOS 25 the files won't work/play.
As LG started to support Profile 8 Dolby Vision from WEB OS 25 in MKV properly, this should be easy fix for LG.
Example of MediaInfo of Profile 7:
Video ID : 1 Format : HEVC Format/Info : High Efficiency Video Coding Format profile : Main [email protected]@High HDR format : Dolby Vision, Version 1.0, Profile 7.6, dvhe.07.06, BL+EL+RPU, no metadata compression, Blu-ray compatible / SMPTE ST 2086, Version HDR10, HDR10 compatible Codec ID : V_MPEGH/ISO/HEVC Duration : 1 h 25 min Bit rate : 55.3 Mb/s Width : 3 840 pixels Height : 2 160 pixels Display aspect ratio : 16:9 Frame rate mode : Constant Frame rate : 23.976 (24000/1001) FPS Color space : YUV Chroma subsampling : 4:2:0 (Type 2) Bit depth : 10 bits Bits/(Pixel*Frame) : 0.278 Stream size : 32.9 GiB (91%) Language : English Default : Yes Forced : No Color range : Limited Color primaries : BT.2020 Transfer characteristics : PQ Matrix coefficients : BT.2020 non-constant Mastering display color primaries : BT.2020 Mastering display luminance : min: 0.0001 cd/m2, max: 1000 cd/m2 Maximum Content Light Level : 966 cd/m2 Maximum Frame-Average Light Level : 223 cd/m2 Cheers and thank you.
-
By Arthur
Hello,
It would be nice to have an ability to play video (not only?) content from folder in shuffle mode.
Thanks.
-
By منير الواقدي
٢٠٢٥٠٥٣١_١٠٤٦٣٦.heic
Factory Mode [How to go to User mode] Press Instop key with a remote control
-
By Justin Bester
Hi
I've been trying many different ways to connect to my TV. I have followed every guide I can find and nothing is working.
Basically, the webOS Desktop Dev Manager thinks my passphrase is wrong. My passphrase is NOT wrong. I have also tried with the CLI tools but nothing works. I have NO idea what I can try further. Any help would be greatly appreciated.
-
By atcronin
I remember when I first bought the TV in Nov '23, it would switch into PC mode (setting the HDMI input to PC) automatically when first connecting my RTX 4090 PC. This behaviour was fine as the TV was indeed being used for PC Gaming.
On my RTX 3050 HTPC I could disable PC mode by changing the input back to HDMI1. This would restore all picture settings options. This change would persist until the HDMI cable was physically disconnected/reconnected. Again, this behaviour was fine for my HTPC where I preferred having access to all the picture settings options vs 444 passthrough.
Now PC mode is reactivated after every Cold Boot (Shutdown > Power On) but not from Warm Boot (Restart).
It is a 'silent' PC mode as the input label does not change back to PC, however the same picture settings are greyed out like in PC mode. Switching the Input label from HDMI1 to another non-PC type disables PC mode again and restores the full picture settings.
I was using the RTX 3050 in my HTPC for a few months after I purchased the TV and did not experience this issue. After a few months I switched to the RX 7600 and continued to not experience this issue. I recently tried going back to the Intel iGPU on the HTPC and discovered this issue. I thought it might be an intel bug, so I reinstalled the RTX 3050 and found the issue again. I've gone back to the RX 7600 as it does not suffer this issue.
I have Game Optimizer options disabled (VRR, Freesync, ALLM), 444 Passthrough Disabled, QMS Disabled.
Intel and Nvidia GPU options tried:
Change output from RGB to YCBCR = no effect
Disable "Text Content Processing" on intel = no effect
Change "Content type reported" on Nvidia = no effect (Movie does activate film maker mode)
Testing performed on Win11 24H2, however also experienced the issue when testing LibreElec(Linux Distro for Kodi) on the intel iGPUs (didn't test Nvidia in LibreElec as unsupported).
Affected GPUs: UHD Graphics 730 on Intel i5-11400 and i3-12100, Nvidia RTX 3050
Unaffected GPUs: AMD RX 7600, Nvidia GT 1030
I've noticed that on the RX 7600 and GT 1030 the SPD Info Frame are blank/Unknown.
While on the UHD 730 - Product Description: PC, Vendor Name: Intel, Source Info: PC
and the RTX 3050 - Product Description: GeForce RTX 3050, Vendor Name: NVIDIA, Source Info: PC
-
Question
Francisco_ARG
Today, I received an LG 43SM5KB-BD television which, upon powering it on, automatically enters the Smart TV mode. After this loading process is complete, it further transitions into a playback mode that displays promotional videos. It's important to note that this mode is not the well-known "retail" or "store mode" which typically features a sidebar with product information, but rather a mode preloaded with videos for playback.
When attempting to press the buttons on the remote control or those located on the back of the television, I do not receive any response. I am in need of exiting this mode to navigate the television as usual. Does anyone know how to exit this mode without having to perform a factory reset?
I appreciate your assistance, and greetings!
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.