- 0
-
-
Similar Topics
-
By Jibun no Kage
Asking this hear, since I could not seem to find a better place... Wake on LAN only works for a few minutes after TV is turned off? If I turn of LG TV (WebOS 8.x) and then send a Wake on LAN (WoL) packet, it works. If turn off the LG TV, then I wait about 15 minutes or so, then send the same WoL sequence, using the same code, script, etc., it fails, the LG TV never turns on. THe LG TV is configured both for wired ethernet (preferred) and WiFi. Any idea why this behavior? It almost seems like the LG TV goes into standby, via phone app, remote, even CEC, etc., then drops from the network? Mobile is enabled on the TV, hence the phone app works. Why would the LG TV stop responding to WoL packets?
-
By Jibun no Kage
Brand new LG TV (WebOS 8x) WILL NOT stay off when turned off with the remote? Out of the box, connected to internet, seems to have been updated, and working fine. But when I hit the power off with the remote, the TV reports 'Life is Good' seems to turn off, i.e. go into standby, and then a few seconds later, turns back on. If the device connected to the TV on the last active HDMI port is OFF, I get the No Signal warning. So I know the active HDMI input is not generating any signal. I want to believe that any other device on any other HDMI port might be an issue? But then the TV would switch to that HDMI port, no? This is really an issue! If I use the phone app I can turn off the TV and it seems to stay off, at least does not come back on in a few seconds like the remote? If I send 'standby' via HDMI-CEC, that seems to work as well, the TV seems to stay in standby mode. This a bug?
-
By JohnS
Hi,
New user on here.
I bought this new TV last week and it is honestly driving me bananas.
When I click "Home" after using an App, etc, it brings me to the WebOS interface but then automatically selects the last used device (e.g. Fire stick, LG Channels, etc) despite me not wanting it to.
Is it possible to disable this, i.e. "Home" brings me to WebOS and stays there? I'm sure its a setting etc which I'm missing.
Device is LG UQ91 43 inch 4K Smart UHD TV, pretty sure its all up to date.
Thanks in advance.
-
By Mike_S
Smart remote constantly disconnects. I’ve pushed home and back button and when trying to setup remote receive error message “Bluetooth service needs to be inialized”
Ive tried everything suggested on the internet to include turning off tv waiting 15,30,60 seconds and trying again. Eventually it will reset up but then will will disconnect. Extremely frustrating and tv is really unusable when this happens. The worst is getting into a streaming app and the remote fails and can’t get out without turning tv off. I would list tv model # but since I started this message remote has disconnected again. Help very much appreciated
thx
-
By 65Nano816
Hello I got Xiaomi mi box for android TV use and I want to connect it to magic remote into the list, mibox also, but impossible to command the mibox with magic remote.
Can you have a solution to connect it correctly ?
-
-
Question
JayDee
I have spent countless hours trying to figure out which remote is compatible with my 27 inch LG television. I can find the TV on LG's website (after intensively searching each time), but when I search the Magic Remotes for compatibility, I've had no luck in anything matching the two.
TV model is 27LQ625S-PU, purchased from Best Buy in America. I'm running 7.3.1-38 for webOS TV version. Trying to purchase one elsewhere online also seems to not have anything resembling my TV make/model.
I don't know what else to do in order to find a remote that works, and I don't want to spend the money trying ten remotes until finding one that does. Am I missing something through the site where I should be searching? Do all remotes work based on webOS version? I'd really love to upgrade this mostly useless remote. I don't use it much right now because I don't like typing through the on-screen keyboard and the remote that came with the TV isn't as easy to use as a universal (I think some of the buttons are in oddly located places). I tend to use external smart devices because the (dumb) remote/webOS don't seem to pair together very well.
I appreciate any help you guys are able to offer, and apologize if this seems like a foolish question.
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.