Bluetooth & HDMI eARC Port Issues
-
-
Similar Topics
-
-
By andreluigo
I used to extend my screen from PC/Notebook to my TV but i stayed a long period without do it.
It happens that since a few days ago i am needing it and for my surprise is not working anymore. Tried other cables, updated the drivers and O.S. but nothing worked. So i decided test at the room's TV (LG as well) and worked perfetcly.
I looked for all internet and youtube for similar issues and a solution but couldn't find it, until i receive my weekly mail from this forum and remembered it.
I am suspicious that was one of the several updates since i extended for the last time that made this!
So, does anybody could help me, please?
Thanks in advance!
-
By Fabulos47
I have an Onkyo TX-NR6050 connected to a LG OLED77C2PUA using a high speed HDMI cable.
When the TV is tuned on the Onkyo comes out of stand-by mode. The volume control on the LG remote is able to raise and lower volume control on the receiver. The LG has a connection to the Onkyo but the LG is not passing any data.
If the receiver is out of stand by mode (by either turning the receiver on first or turning the TV on --> off --> on) then there is a data connection and sound can be heard.
The issue seems to be in the timing of the handshake between the two devices. The LG has no problem turning on the onkyo but whether the data connection is established is based on the receiver being out of stand by mode first.
I tried everything found on line from changing HDMI connection type form Auto, PCM, and pass through. I have tried disabling the quick start from LG setup.
It is very annoying considering the amount of money invested into a setup that is suppose to be eARC 2.1. I should not have to use the home theater remote.
Any ideas?
-
By JamesH
I output the sound from my LG 75UJ657A to external speakers through a bluetooth connection, but it doesn't automatically connect to the bluetooth device when I turn the TV on. Whenever I cycle the TV off and, then, back on, the TV asks if I want to connect to the bluetooth device, and I have to select "yes" with the remote. My smart phone automatically connects to all the bluetooth devices I've set it up with. When I start my car, my phone connects automatically to the car stereo/phone system, and it does the same with other bluetooth speakers I have. This is what I want my TV to do.
How do I get my LG 75UJ657A to automatically connect to the bluetooth device I've set up with it?
-
By John Bizeray
I recently updated the firmware on my LG43UH610V. Now I constantly get "Wired Lan cable disconnected" / "Wired network is connected" messages even while watching a video file from my NAS. The TV is connected and using the network while getting these messages. It has always been on a fixed IP address on the LAN.
-
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.