Quantcast
Jump to content

Don't update to 04.40.19

Kraftwerk
 Share

Recommended Posts

Kraftwerk Rookie

Kraftwerk

Posted
Posted

Less than a week ago, my 55NANO906NA updated to 04.40.19. Since then, when changing channels, I get some channels with no sound, channels with sound and a black screen, and sometimes just a black screen with no sound. Some channels do show up after +5 seconds. Channels which are not being displayed, do show up after turning off and back on the TV.

None of the mentioned issues were present until the latest firmware version which I mentioned.

I tried to reinstall the update using a USB drive but this only works for updating, not reinstalling the same version.

I rad an article about how to register to the development program to be able to downgrade the firmware and if these issues persist in the following days I will give it try. 

I really don't understand how this can be possible. Is there any channel to report these issues and get them officially fixed?

It's really sad to get all these problems , just after the support period ended. Is it really a coincidence or just a lost of interest towards the older already sold products?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Glamma2311
      OLED65CXAUA lg tv. software update - tv is now acting very strange
      By Glamma2311
      My tv is acting strangely after there was a software update (sometime between April 10-15,2024)
      randomly turning off and on -- many times within a few minutes remote works some of the time or only certain buttons goes to a colored screen i.e. purple, yellow, light blue with no image just color sudden annoying continuous, high pitch sound like an alarm Checked and reset the cable box and called cable company. 
      Unplugged and plugged tv back in.
      Change the HDMI input
      It is becoming very frustrating. 
    • OliverRC
      Latest software update broke HDMI on my LG OLED G2?
      By OliverRC
      Up until a few days ago my TV and AVR have been working perfectly since I bought it.
      Zero hassles with HDMI and connectivity.
      Then I was prompted to update to the latest software version which I did and now often when I switch HDMI (running on 1) it picks up the device name, CEC works but I get “No Signal”… and then nothing.
      Just stays on “No Signal”. It is almost as if some HDMI handshake breaks and now the driver is in a broken state.
      I’ve found that if I hard power off and power on the device sometimes works but I don’t want to do that every time especially since it’s hard to get to the power.
      This really strikes me as a software issue with the latest update as absolutely nothing else has changed in my setup.
      I’ve tried:
      Different HDMI cables (high quality) Deep colour settings Reset the TV to factory default Different HDMI ports TV
      Model: OLED65G26LA / OLED65G26LA.HFBQLWK WebOS TV Version: 8.3.0.2301 Software Version: 13.30.56 AVR & Devices
      Marantz SR5015 Nvidia Shield Pro PS5
        The setup is the conventional AVR installation as shown in the attached file

       
      Has anyone else experienced this? 
      Is it possible to revert the software update?
    • Roy Brown
      Sky News stopped working after the webOS update
      By Roy Brown
      webOS updated, I think to 2023, on my C2 a couple of days ago. Since then the News option on the Sky News app no longer works, instead timing out. The Weather and Climate options still work, though.
      I have deleted and reloaded the Sky News app, but the problem remains.
      Does anybody have any suggestions of what I might try to get this working again, or is this something for LG, or Sky, to fix?
    • Alex
      LG TV - How to update an LG Smart TV
      By Alex
      Automatic Firmware Update
      Press the Home/Smart button on your remote to bring up your launcher bar.
      Click the Settings icon in the top-right.
      Choose the All Settings option at the bottom.
      Choose the General menu from the left.
      Scroll down, near the bottom of the list, and select About this TV.
      From here, make sure Allow automatic updates is checked, and click the Check for updates button.
      If an update is found, follow the steps on screen to download and install it.
       
       
    • DavidSr
      PLEX app on both LG Tv's won't connect after last update
      By DavidSr
      We have two LG TV's that stopped connecting to our PLEX media server after the last update. TImes out saying "Checking connection speed to Raspberrypi" which the PLEX is on
      Upgraded the Mesh Routers before trying anything, still only the PLEX app doesn't work
      Our other TCL TV and Roku and TIVO still work with Plex, so this is only the LG TV's that can't connect anymore.
      Another annoying error after the last update is that any Streaming app (Amazon, Netflix, and DIsney) now fall out of the app and go back to HDMI port 1 if we pause for 30 seconds.  Which we have always done for a Bathroom break or getting drinks.

WEBOS FORUMS

MORE SECTIONS

FOLLOW US ON

×
×
  • Create New...