- 0
-
Similar Topics
-
By David Daul
My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working. I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote." Well... this really stinks because the remote doesn't work!!! I have tried a USB mouse, a new magic remote, other LG Remotes with no luck. I have also tried using the button on the bottom of the tv. And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs. Does anyone have a trick for getting past this initial screen???
Thanks for the help.
-
By RJ Fischer
New LG 55" C4, Magic Remote STB setup does not provide for Charter/Spectrum Arius STB model DCX3220? This is a current model STB and previous LG models did provide MR setup for this model.
-
By Regis Wheeler
Apparently, the LG model OLED55CSPUA has an issue with the external device power on/off control. I can configure the IR Bose soundbar well enough, as setup sequence tests it good to control soundbar power. but after exiting the setup, when i press the external device power button on the remote, the TV just wants to cycle through the setup again. It doesn't toggle soundbar power, just cycles back to the setup. i have tried factory settings reset and verified that there are no other devices on the TV.
-
By JasonB
Trying to programme my magic remote to control an Amlogic OTT, however keep getting a ‘temporary issue occurred’ when I try. I’ve been trying for over a week now, so this temporary issue isn’t so temporary!
-
-
By u84six
I haven't searched this forum, but there has to be others who find that tv remote pointer to be extremely annoying. I'm actually surprised that we still can't turn that feature off. Having the cursor/pointer feature isn't even close to the importance of being able to shut off. I mean, how hard is to put one checkbox in the ui to toggle the feature on or off? It seems like a no-brainer, big bang for the buck change that many users would appreciate
-
Question
Patti
I just did the initial set up yesterday for LG 55UQ7570PUJ. I discovered that the user information I have found refers mostly to the "magic" remote
and I have a standard. Will I still have decent functionality? I have AT&T U-verse and I have to switch to the cable remote to change channels.
Is it possible I can get things set up to use one or the other remote? A tech told me over the phone I'd either need the magic remote, or I'd need to contact
the cable provider. I don't think my model supports the magic remote. This is my first Smart TV experience. Can someone take me by the hand
and get me over the fear that I won't be able to figure things out?
Thank You.
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.