- 0
-
-
Similar Topics
-
By RussS
When using the Fubo app with my magic remote the app goes wildly crazy as I move the remote around. If I do not press the center button to activate the pointer navigation works using left right up down .
-
By delos
Hey everyone,
I'm new here, so first of all, hello I'm delos.
I own two LG OLED55G19 TVs, one at home and one elsewhere. At home, I have a QNAP NAS (TS451) with DLNA functionality. Accessing it at home works great.
The "Home" and "External" networks are connected via VPN. Thus, both networks have different network addresses.
Now I want to access the home network from the external network with the LG via VPN in order to integrate the DLNA server. The LG doesn't "see" the external server because it's not in the same network. However, I wonder why you can't just enter the IP address of the server in the LG.
Does anyone have a solution?
Many greetings
delos
-
By curious george
Hi, I'd like to disable the bluetooth on my G2 and was wondering if this was possible without having to disconnect the bluetooth module in the back?
-
By David Daul
My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working. I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote." Well... this really stinks because the remote doesn't work!!! I have tried a USB mouse, a new magic remote, other LG Remotes with no luck. I have also tried using the button on the bottom of the tv. And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs. Does anyone have a trick for getting past this initial screen???
Thanks for the help.
-
-
By Jim11787
New OLED C3. New setup and I can’t change channels using tv magic remote- I have to use set top box remote. Verified setup with LG tech today and it is correct. Upon him checking for solutions he said there is a software bug that is not allowing the magic remote to change channels. Stated a fix is in works but doesn’t know when it will be available. Asked for a supervisor and was told one would call back in a few hours but they didn’t. I can return the tv now but was wondering if others are having this issue and for how long. I don’t want to get stuck with a tv with multiple remotes.
-
-
Question
Milad Mazaheri
Hi guys
I have a Magic Remote AN-MR3005
I wanted to plug it into my computer via Bluetooth and use it as a mouse
When connecting and pairing, I need the pairing code to enter the pin behind the control
But unfortunately, Bluetooth does not accept the code behind the control
Is there a way to do this?
And is it experimental?
Thank you all
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.