A couple days ago My LG Oled voice recognition stopped working.
If I speak to it it just says "Voice not recognized"
I have tried many things I found online to fix this issue with no luck.
One suggestion was to go to Settings>all settings>general>AI Service>Voice recognition service and change to LG ThinQ.
But the Voice recognition service tab is gone. There is only voice recognition settings tab
I would rather not have to reset to factory settings unless there is a way to save / export my current seating's
By Low Grade
i just started using a new LG 43UR7550 (cheapest model from them).......1st time using a LG as well as a Smart TV too.......and so far having a hard time adjusting the picture and sound (never had such problems with previous TVs)😒
1) sound is worse than i thought since the speakers are down-firing (my previous TV had front-firing speakers)...........it has the AI Sound Tuning - so after it had tuned the sound - do i set the Sound Mode to ''AI'' or should i use ''Custom Settings'' to use the equalizer ??😬
2) the TV has many different settings like Noise Reduction, TruMotion, etc.......so how to calibrate for best picture since i read that people say it's best to turn them all off ?😬
3) i can turn off the screen when watching free-to-air broadcast channels.........but can i turn off the screen if i'm using Youtube app on the TV..........?..........what if i use a HDMI cable from my PC to the TV - can i turn off the screen ?🤒
many thanks in advance😃
By David Daul
My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working. I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote." Well... this really stinks because the remote doesn't work!!! I have tried a USB mouse, a new magic remote, other LG Remotes with no luck. I have also tried using the button on the bottom of the tv. And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs. Does anyone have a trick for getting past this initial screen???
Thanks for the help.