- 0
webOS 2.2 - screensaver, off period, SmartShare
-
Similar Topics
-
By Richard Marchlewski
My LG G2 bought last November has now started to turn off every 10-15 minutes when gaming on my PS5 which is directly connected. It also from time to time identifies the PS5 as a different device (Shield TV). Any suggestions on how to fix would be welcome.
-
By Lgrump
Is it just me or is the plex app just unusable on webos. When I try to select dvr items with the magic remote they just don’t play. I am not sure if this is a plex issue or an lg webos issue. Anyone know which it is?
-
By JonoW
Has anyone else had the same problem as me regarding the 'like' button on the YouTube app on my Oled77g7v? There is a thumbs up button and a thumbs down button for each video. These icons are supposed to be just an outline unless you click on them and then they fill in to show you have selected them. However, this no longer works on my TV. It is as if you never clicked. In fact, the 'like' icon is always pre_filled, no matter what I do. This used to work properly and it still works correctly on a Sony TV I have. Any ideas would be very welcome!
-
By Tamás A.
hello,
I'm having problems with terrestrial TV broadcasts after installing the (Version 06.10.30) software package. The TV broadcasts that were saved are out of order and the search no longer runs as before. Suddenly the search bar jumps from 0% to 100% and no broadcasts are found. Neither radio nor TV. I have tried 3 DVBT2 antennas and two coax cables to see if that is the problem. But all of them behaved the same way on the TV, which is an LG 60SJ850V-ZA. I also tried a full TV reset but that didn't help. I also had the TV turned off for a longer period of time with no electricity, but it made no difference. The release date of the softer package is in December on the site, for me it appeared on the TV (OTA) around late January - early February. Should I expect a new patch in the near future or should I try a downgrade? Any other advice? Thanks in advance for your replies.
I'm currently buying a DVBT2 TV-BOX to watch the channels that are important to me, it's just a bit funny that I need this for such an "expensive" TV (for me). It is not a modern AI piece, but still...
-
By joshitha
I recently bought LG smart TV. I would like to know, how can I turn on my LG TV without a remote control?
-
-
Question
swenak
Hi,
I have 55EG9A7V and I have few problems (except fact, that 2017 TV have 2 years old webOS 2.2).
1) It seems, that if I stop playing DLNA source, or pause in SmartShare, it turn on screensaver, but not automaticaly turning TV off after short period (like period without signal is). I know, that I wat to inactivity period, but it is minimal 4 hours of burning OLED display and power consumption. Is any chance to change it?
2) If I use TV only as DLNA player with SmartShare (so, without HDMI or live source), after each power on, I must close question, If I want to open inputs list (or wait 20 seconds). Can I disable it?
3) When I play videos from DLNA server, after each video end, it start next video. Is any chance to play only one video and after it end, TV start screensaver - and/or turn off - as is in point 1)?
4) Inactivity period is 4 hours minimal. Can I change it to 1hour, or 30min, or so?
Thanks
PS: Maybe something can I change im service menu, but I cannot find, how.
Link to comment
Share on other sites
Top Posters For This Question
1
Popular Days
Oct 22
1
Top Posters For This Question
swenak 1 post
Popular Days
Oct 22 2017
1 post
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.