Quantcast
Jump to content

  • 0

LG 47LB670V bricked after self update


Florin Socol

Question

Last night, around 22:30 CET I got a screen notice that there is a new update avalable for my TV. I coose to install it and after some time I got a new notfication that the update will finish istalling on next restart. So I restarted the TV using the remote, but it only displays the LG logo!

 

On local Romanian LG facebook page, another guy shared the same expirience last night :( 

 

 

I opened a service request at LG suport service. Waiting for the tech to call me. 

  • Like 1
Link to comment
Share on other sites

16 answers to this question

Recommended Posts

  • 0

The same happened to me with a 42LB671V (yesterday evening in Germany). The only odd thing was the download being unusually slow (4 hours!).

 

I already tried to restore the previous firmware via USB, but it seems that a USB key is not recognized during bootup.

 

Is there another recovery procedure for the WebOS SmartTVs?

 

Thank you.

  • Like 1
Link to comment
Share on other sites

  • 0

Hello, my first post here.

Same problem here, after last update my tv(42LB730) is stuck. I call (Romanian)LG service centre and the problem seems to be an wrong Holand servere update. My tv now is in the service, the digital video board must be changed (Eprom issue).

Link to comment
Share on other sites

  • 0

Same problem occurred in Turkey on 32LB652v. 

 

After the notice, upgrade process began, TV restarted but stuck on LG logo. 

 

Nothing works. :angry:

 

Did LG tech service say anything about the issue? I have given them a call but they have yet to return.

Link to comment
Share on other sites

  • 0

HELLO GUYS!MY SMART TV LG WEBOS 3D 119 CM HAVE THE SAME PROBLEM LIKE FLORIN SOCOL...I TURNED ON THE TV AND ON THE SCREEN SHOW WEBOS LOGO IN PINK COLOR AND ON THE TEN TIMES OF RESTART SHOW THE SAME THING,IN THE BOOT ENTER THE NORMAL LOGO OF LG AND THEN THE WEBOS LOGO IN PINK COLOR!!!GIVE ME GUYS A ADVICE!IT COULD BE BRICKED?????

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Glamma2311
      My tv is acting strangely after there was a software update (sometime between April 10-15,2024)
      randomly turning off and on -- many times within a few minutes remote works some of the time or only certain buttons goes to a colored screen i.e. purple, yellow, light blue with no image just color sudden annoying continuous, high pitch sound like an alarm Checked and reset the cable box and called cable company. 
      Unplugged and plugged tv back in.
      Change the HDMI input
      It is becoming very frustrating. 
    • By OliverRC
      Up until a few days ago my TV and AVR have been working perfectly since I bought it.
      Zero hassles with HDMI and connectivity.
      Then I was prompted to update to the latest software version which I did and now often when I switch HDMI (running on 1) it picks up the device name, CEC works but I get “No Signal”… and then nothing.
      Just stays on “No Signal”. It is almost as if some HDMI handshake breaks and now the driver is in a broken state.
      I’ve found that if I hard power off and power on the device sometimes works but I don’t want to do that every time especially since it’s hard to get to the power.
      This really strikes me as a software issue with the latest update as absolutely nothing else has changed in my setup.
      I’ve tried:
      Different HDMI cables (high quality) Deep colour settings Reset the TV to factory default Different HDMI ports TV
      Model: OLED65G26LA / OLED65G26LA.HFBQLWK WebOS TV Version: 8.3.0.2301 Software Version: 13.30.56 AVR & Devices
      Marantz SR5015 Nvidia Shield Pro PS5
        The setup is the conventional AVR installation as shown in the attached file

       
      Has anyone else experienced this? 
      Is it possible to revert the software update?
    • By Roy Brown
      webOS updated, I think to 2023, on my C2 a couple of days ago. Since then the News option on the Sky News app no longer works, instead timing out. The Weather and Climate options still work, though.
      I have deleted and reloaded the Sky News app, but the problem remains.
      Does anybody have any suggestions of what I might try to get this working again, or is this something for LG, or Sky, to fix?
    • By Alex
      Automatic Firmware Update
      Press the Home/Smart button on your remote to bring up your launcher bar.
      Click the Settings icon in the top-right.
      Choose the All Settings option at the bottom.
      Choose the General menu from the left.
      Scroll down, near the bottom of the list, and select About this TV.
      From here, make sure Allow automatic updates is checked, and click the Check for updates button.
      If an update is found, follow the steps on screen to download and install it.
       
       
    • By Wondering
      After viewing photos/videos on a flashdrive plugged into the USB of an LG TV and using SmartShare to view... and then removing the USB and then no longer having access to the TV... I noticed on the flashdrive a new folder called "LG TV" and within what appears to be files that may have been the thumbnails displayed on the TV. My question is... do those thumbnails also remain on the TV as recent history even without the USB plugged in? The LG Smart TV online user guide refers to "Recent" ("To view a list of recently viewed or added content, select Recent). Would thumbnails be there without the source flashdrive?
×
×
  • Create New...