Quantcast
Jump to content

LG ThinQ Android Remote app and Hotel Mode

SGray
 Share

Recommended Posts

SGray Newbie

SGray

Posted
Posted

Hi - My LG television is currently being bombarded by my toddler messing with the physical control panel, mainly for the volume. Separate to this, I always like to have an Android-enabled remote as I don't always have the physical remote at my side.

As I did with my old Samsung television prior to upgrading, I disabled the physical buttons on the television using Hotel Mode. I did it on my LG and it was perfectly fine... Until I went to use the LG ThinQ Android app. What followed was days of head scratching why suddenly my LG app was not working - In the end because a few days had passed, my toddler wasn't interested in the non-working physical buttons, I decided to play around with the Hotel Mode - This is when I found that there was a direct conflict between the Android app and Hotel Mode being enabled.

I tried on a different phone with the same results. However toddler has once again realised the physical buttons work - So in the process of pulling out my hair. I did have another remote app which worked well on my Samsung television, but LG seemed to have nixed it on support so I cannot use the third party app.

Is there a light at the end of the tunnel??

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • RussS
      Smart Remote Uncontrollable
      By RussS
      When using the Fubo app with my magic remote the app goes wildly crazy as I move the remote around. If I do not press the center button to activate the pointer navigation works using left right up down .
    • delos
      LG TV remote DLNA access via VPN
      By delos
      Hey everyone,
      I'm new here, so first of all, hello I'm delos.
      I own two LG OLED55G19 TVs, one at home and one elsewhere. At home, I have a QNAP NAS (TS451) with DLNA functionality. Accessing it at home works great.
      The "Home" and "External" networks are connected via VPN. Thus, both networks have different network addresses.
      Now I want to access the home network from the external network with the LG via VPN in order to integrate the DLNA server. The LG doesn't "see" the external server because it's not in the same network. However, I wonder why you can't just enter the IP address of the server in the LG.
      Does anyone have a solution?
       
      Many greetings
      delos
    • David Daul
      Factory Reset, Remote Won't Work, Stuck on Press the OK button(wheel) on your remote (55NANO81ANA)
      By David Daul
      My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working.  I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote."  Well... this really stinks because the remote doesn't work!!!  I have tried a USB mouse, a new magic remote, other LG Remotes with no luck.  I have also tried using the button on the bottom of the tv.  And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
      This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs.  Does anyone have a trick for getting past this initial screen???
      Thanks for the help.
    • Jim11787
      New OLED C3 can’t change channels with magic remote
      By Jim11787
      New OLED C3. New setup and I can’t change channels using tv magic remote- I have to use set top box remote. Verified setup with LG tech today and it is correct. Upon him checking for solutions he said there is a software bug that is not allowing the magic remote to change channels. Stated a fix is in works but doesn’t know when it will be available. Asked for a supervisor and was told one would call back in a few hours but they didn’t. I can return the tv now but was wondering if others are having this issue and for how long. I don’t want to get stuck with a tv with multiple remotes. 
    • Rayden79
      Tv in standby mode, then off and do not power on
      By Rayden79
      I'm having this problem with LG Oled 65c16LA with WebOs Version 03.40.85
      When I turn off the TV, it goes into standby mode.
      After 2 minutes the red standby LED turns off and it is no longer possible to turn the TV back on with the remote or with the power on button.
      It is then necessary to unplug the power supply, wait a few minutes and reconnect it.
      So the TV goes back to standby and you can turn it on again. In use everything works.
      Is it a software problem? How can I solve it?
      Thank you

WEBOS FORUMS

MORE SECTIONS

FOLLOW US ON

×
×
  • Create New...