Quantcast
Jump to content

  • 0

LGSM8100 - 05.20.08 don't memorize quick access after TV restart

Cedric

Asked by Cedric,

 Share

Question

Cedric Apprentice

Cedric

Posted
Posted

Hello,

Since my TV updated to the last WebOS firmware 05.20.08, quick access key (Long Press 1 for HDMI1, Long press 2 for HDMI2) are reset each time i shutdown the TV, and i have to set them after each reboot...

I tried to restore the factory default settings on the TV to see if there is any change, but sadly this didn't fixed my problem.

Any idea please ?

Link to comment
Share on other sites

9 answers to this question

Recommended Posts

  • 0
Cedric Apprentice

Cedric

Posted
  • Author
Posted
2 hours ago, Jokin Uribe said:

Sorry Cedrid, It's not posible.

thats LG support crew in Spain told me..

..

I heard the almost the same thing, downgrade is possible but not without breaking the warrant.
I hope WebOS will release a patch soon enough.

 

 

 

 

Link to comment
Share on other sites
  • 0
Jokin Uribe Newbie

Jokin Uribe

Posted
Posted

Hi all...

First of all, sorry for my poor english..

At last i found a solution for the 'quick access bug' in my 'LG 43UM7400PLB' tv..

I made a backup of my tv channels setup in fat32 formated pendrive.

Deleted all my quick access bookmarks.

Unpluged all my hdmi devices.

restored tv factory settings from setup menu.

plugged all my hdmi again.

test quick access again... 

remap al hdmi quick access entries..

turn off tv.

turn on tv, check quick access.

it worked !!!

restore tv channels from usb drive.

Lg service sent me an update, i applyed it but did'nt work until i restored factory settigns.

That was the solution..

At lastttttttttttttt..

Cheers!

Jokin

Link to comment
Share on other sites
  • 0
Cedric Apprentice

Cedric

Posted
  • Author
Posted
On 2/20/2022 at 9:43 PM, Jokin Uribe said:

Hi all...

First of all, sorry for my poor english..

At last i found a solution for the 'quick access bug' in my 'LG 43UM7400PLB' tv..

I made a backup of my tv channels setup in fat32 formated pendrive.

Deleted all my quick access bookmarks.

Unpluged all my hdmi devices.

restored tv factory settings from setup menu.

plugged all my hdmi again.

test quick access again... 

remap al hdmi quick access entries..

turn off tv.

turn on tv, check quick access.

it worked !!!

restore tv channels from usb drive.

Lg service sent me an update, i applyed it but did'nt work until i restored factory settigns.

That was the solution..

At lastttttttttttttt..

Cheers!

Jokin

Thanks,

 I will try

Link to comment
Share on other sites
  • 0
Cedric Apprentice

Cedric

Posted
  • Author
Posted
On 2/20/2022 at 9:43 PM, Jokin Uribe said:

Hi all...

First of all, sorry for my poor english..

At last i found a solution for the 'quick access bug' in my 'LG 43UM7400PLB' tv..

I made a backup of my tv channels setup in fat32 formated pendrive.

Deleted all my quick access bookmarks.

Unpluged all my hdmi devices.

restored tv factory settings from setup menu.

plugged all my hdmi again.

test quick access again... 

remap al hdmi quick access entries..

turn off tv.

turn on tv, check quick access.

it worked !!!

restore tv channels from usb drive.

Lg service sent me an update, i applyed it but did'nt work until i restored factory settigns.

That was the solution..

At lastttttttttttttt..

Cheers!

Jokin

Tried and it don't work...

By the way I disabled  "TV Quickstart" setting after the TV factory reset (Have you done it too ? ).
With TV Quickstart enabled, the quick access settings are in memory even if I shutdown the tv (normal after all, because the TV is not really shutdown).

Before the last LGWEBOS patch 05.20.09, even with TV "quick star / fast start" setting  disabled my quick access settings were correctly memorized even after the TV reboot. This is no more the case.

I really hope LG/ Webos will correct the problem or at least permit us to downgrade the firmware.

 

Link to comment
Share on other sites
  • 0
Padraic Doyle Newbie

Padraic Doyle

Posted
Posted
On 2/20/2022 at 8:43 PM, Jokin Uribe said:

Hi all...

First of all, sorry for my poor english..

At last i found a solution for the 'quick access bug' in my 'LG 43UM7400PLB' tv..

I made a backup of my tv channels setup in fat32 formated pendrive.

Deleted all my quick access bookmarks.

Unpluged all my hdmi devices.

restored tv factory settings from setup menu.

plugged all my hdmi again.

test quick access again... 

remap al hdmi quick access entries..

turn off tv.

turn on tv, check quick access.

it worked !!!

restore tv channels from usb drive.

Lg service sent me an update, i applyed it but did'nt work until i restored factory settigns.

That was the solution..

At lastttttttttttttt..

Cheers!

Jokin

Has your change actually survived a Sofware Update ..  as I read it you have simply set up your Quick Access assignments again. My problem is they get wiped out on every Software Update and I then have to set them up again.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to question listing

  • Similar Topics

    • Roy Brown
      Sky News stopped working after the webOS update
      By Roy Brown
      webOS updated, I think to 2023, on my C2 a couple of days ago. Since then the News option on the Sky News app no longer works, instead timing out. The Weather and Climate options still work, though.
      I have deleted and reloaded the Sky News app, but the problem remains.
      Does anybody have any suggestions of what I might try to get this working again, or is this something for LG, or Sky, to fix?
    • delos
      LG TV remote DLNA access via VPN
      By delos
      Hey everyone,
      I'm new here, so first of all, hello I'm delos.
      I own two LG OLED55G19 TVs, one at home and one elsewhere. At home, I have a QNAP NAS (TS451) with DLNA functionality. Accessing it at home works great.
      The "Home" and "External" networks are connected via VPN. Thus, both networks have different network addresses.
      Now I want to access the home network from the external network with the LG via VPN in order to integrate the DLNA server. The LG doesn't "see" the external server because it's not in the same network. However, I wonder why you can't just enter the IP address of the server in the LG.
      Does anyone have a solution?
       
      Many greetings
      delos
    • Puja aingh
      Auto restart my app because free up my storage
      By Puja aingh
      Dear LG TEAM
        Kindly resolve this issue 
      My lG TV MODEL NO IS 32LK628BPTF
       

    • Wondering
      Does USB content leave thumbnails via SmartShare on LG TV after removing USB?
      By Wondering
      After viewing photos/videos on a flashdrive plugged into the USB of an LG TV and using SmartShare to view... and then removing the USB and then no longer having access to the TV... I noticed on the flashdrive a new folder called "LG TV" and within what appears to be files that may have been the thumbnails displayed on the TV. My question is... do those thumbnails also remain on the TV as recent history even without the USB plugged in? The LG Smart TV online user guide refers to "Recent" ("To view a list of recently viewed or added content, select Recent). Would thumbnails be there without the source flashdrive?
    • DavidSr
      PLEX app on both LG Tv's won't connect after last update
      By DavidSr
      We have two LG TV's that stopped connecting to our PLEX media server after the last update. TImes out saying "Checking connection speed to Raspberrypi" which the PLEX is on
      Upgraded the Mesh Routers before trying anything, still only the PLEX app doesn't work
      Our other TCL TV and Roku and TIVO still work with Plex, so this is only the LG TV's that can't connect anymore.
      Another annoying error after the last update is that any Streaming app (Amazon, Netflix, and DIsney) now fall out of the app and go back to HDMI port 1 if we pause for 30 seconds.  Which we have always done for a Bathroom break or getting drinks.

WEBOS FORUMS

MORE SECTIONS

FOLLOW US ON

×
×
  • Create New...