Trying to programme my magic remote to control an Amlogic OTT, however keep getting a ‘temporary issue occurred’ when I try. I’ve been trying for over a week now, so this temporary issue isn’t so temporary!
By Eigil Hysver
Hi, I have a web app running on a webos 2018 TV. It is enhanced with aria-labels and such so that a screen reader should synthesize speech from the focused elements. I have turned on voice assistance of course. On another well known platform I have speech, but on this system it is silent. I know I can make it speak using webos API, but for now I'm looking for this screen reader approach. Is there anything I can do to enable it?
Hello, the wifi of my smart TV is broken since the last update.
The remote control from my phone too when i use an opérational ethernet connection.
Full setting reset
After the power reset and unplugged during at least 10 min, the WiFi networks was at new listed but impossible to connect, it says WiFi network not found.
After a new power off, the searching of wifi networks didn't end without result.
The remote control also lag a lot each 10 seconds and during 3 or 4 seconds.
TV Informations :
Model : 49SJ800V-ZB
Devide Name : [LG] webOS TV SJ800V
Serial Number : 711MAVDM8903
webOS TV Version : 3.9.0-62709 (dreadlocks2-dudhwa)
MAC Wired : 38:8C:50:F3:2B:5D
MAC Wireless : 7C:1C:4E:A0:E8:C7
ESN : LGTV20171=11002626448
VSN : 5DBF066A
Widevine : LGTV17CLGE005126094
Is there a way to downgrade by putting the firmware on a USB Key with a FAT 32 filesystem on to be sure it could be read by the TV ?
Thank you in advance for your help.
I have a LGOLED55CX3LA tv and a TH200 settop box device for IPTV. I'm trying to setup the Universal control function so that I'd be able to control the settop box with my lg magic remote control.
Unfortunately, I do not see the settop box model under the supported providers. TH200 is a very common model of settop box. How come it's not listed?
Am i missing something? Is there a way to configure it and control the device using the magic remote?