Need some help with my 55B6.....can't get the firmware to update......I have 3 spinning dots!!
Here is what has happened..... - When watching I was getting the screensaver fireworks for no reason - As done in previous situations, I triggered "reset to initial settings". - the 3 colored spinning dots were triggered as if the reset had started, but no reset occurred. - the 3 colored spinning dots would not go away. - I downloaded the firmware to USB and tried to update using the manual USB update process per LG's online instructions. - When I turn on the TV, with USB inserted, I still get the 3 colored spinning dots -- NOTHING HAPPENS!
I have tried 2 different USB drives and formatted both to FAT32, no success. Can't get past the 3 spinning dots!
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
please add 10bit sdr and hevc supports to webos and youtube support all new cameras has this and lg webos still can't handle properly hevc on youtube or inside webos.
Pleae add support for 10bit sdr and hevc codec.
I have noticed a problem with webOS, i have С4 OLED and G5 OLED - and all of them running videos on youtube at low 1080p or no higher that 1440p with 50/60p - and i don't understand why.. everywhere else is fine, but on webOS is 50/50 i tried every codec possible and everytime my videos stuck on 1080p or 1440p - it's a problem! please fix it!
PS everything is fine if i upload 4k25p or 4k30p
PSS it's a problem only on webOS - on PC or android everything is OK.
Hello,
I have a TV oled65c5elb with webos25 10.2.1-5504.
I programmed in Home assistant a few Dashboard to contol the TV. I can Switch the Channels from live TV by Home Assistant. But Not in LG Channels or other Apps Like Pluto TV. If someone can Help me, please Post it. Thank you.
Question
ken325i
Need some help with my 55B6.....can't get the firmware to update......I have 3 spinning dots!!
Here is what has happened.....
- When watching I was getting the screensaver fireworks for no reason
- As done in previous situations, I triggered "reset to initial settings".
- the 3 colored spinning dots were triggered as if the reset had started, but no reset occurred.
- the 3 colored spinning dots would not go away.
- I downloaded the firmware to USB and tried to update using the manual USB update process per LG's online instructions.
- When I turn on the TV, with USB inserted, I still get the 3 colored spinning dots -- NOTHING HAPPENS!
I have tried 2 different USB drives and formatted both to FAT32, no success. Can't get past the 3 spinning dots!
Don't know where to go with next step!!
Thanks for any help you can provide!
Ken
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.