- 0
-
-
Similar Topics
-
By OliverRC
Up until a few days ago my TV and AVR have been working perfectly since I bought it.
Zero hassles with HDMI and connectivity.
Then I was prompted to update to the latest software version which I did and now often when I switch HDMI (running on 1) it picks up the device name, CEC works but I get “No Signal”… and then nothing.
Just stays on “No Signal”. It is almost as if some HDMI handshake breaks and now the driver is in a broken state.
I’ve found that if I hard power off and power on the device sometimes works but I don’t want to do that every time especially since it’s hard to get to the power.
This really strikes me as a software issue with the latest update as absolutely nothing else has changed in my setup.
I’ve tried:
Different HDMI cables (high quality) Deep colour settings Reset the TV to factory default Different HDMI ports TV
Model: OLED65G26LA / OLED65G26LA.HFBQLWK WebOS TV Version: 8.3.0.2301 Software Version: 13.30.56 AVR & Devices
Marantz SR5015 Nvidia Shield Pro PS5
The setup is the conventional AVR installation as shown in the attached file
Has anyone else experienced this?
Is it possible to revert the software update?
-
By RussS
When using the Fubo app with my magic remote the app goes wildly crazy as I move the remote around. If I do not press the center button to activate the pointer navigation works using left right up down .
-
By Roy Brown
webOS updated, I think to 2023, on my C2 a couple of days ago. Since then the News option on the Sky News app no longer works, instead timing out. The Weather and Climate options still work, though.
I have deleted and reloaded the Sky News app, but the problem remains.
Does anybody have any suggestions of what I might try to get this working again, or is this something for LG, or Sky, to fix?
-
By Alex
Automatic Firmware Update
Press the Home/Smart button on your remote to bring up your launcher bar.
Click the Settings icon in the top-right.
Choose the All Settings option at the bottom.
Choose the General menu from the left.
Scroll down, near the bottom of the list, and select About this TV.
From here, make sure Allow automatic updates is checked, and click the Check for updates button.
If an update is found, follow the steps on screen to download and install it.
-
-
By dolbnya
I have a mediaplayer connected to my TV OLED55C6V through HDMI. For every video playback the player tries to select an output HDMI signal format automatically depending on both video framerate/resolution and framerate/resolution supported by the connected TV to show the video as close to original as possible with the TV without any scaling. And here I have a problem: the maximum resolution the player selects is 1080p despite of the videofile has resolution 4k and the TV supports playback of the input signal up to 4K60p. I can change the output signal resolution on the player manually after blayback starting and it works, but it's not convenient. As far as I know the only way of getting information about videosignal format supported by TV for the player is EDID on HDMI channel. So is it possible to fix the issue? Maybe some hidden setting in TV could change the version of EDID?
-
-
Question
pabloh
I hv a new LG 55LF650Y Smart TV and try to use Cellcom TV App. It seems that the latest version is old (almost one and a half year ago). The main problem is that Cellcom TV has updated the app with major features like additional live sports channels and it is nor reflected in the latest version available for update in LG content store.
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.