- 0
-
-
Similar Topics
-
By Glamma2311
My tv is acting strangely after there was a software update (sometime between April 10-15,2024)
randomly turning off and on -- many times within a few minutes remote works some of the time or only certain buttons goes to a colored screen i.e. purple, yellow, light blue with no image just color sudden annoying continuous, high pitch sound like an alarm Checked and reset the cable box and called cable company.
Unplugged and plugged tv back in.
Change the HDMI input
It is becoming very frustrating.
-
By JeanF
In the favorites list, the last favorite is added at the end of the list. How to change/sort the sequence of the favorites ?
-
By OliverRC
Up until a few days ago my TV and AVR have been working perfectly since I bought it.
Zero hassles with HDMI and connectivity.
Then I was prompted to update to the latest software version which I did and now often when I switch HDMI (running on 1) it picks up the device name, CEC works but I get “No Signal”… and then nothing.
Just stays on “No Signal”. It is almost as if some HDMI handshake breaks and now the driver is in a broken state.
I’ve found that if I hard power off and power on the device sometimes works but I don’t want to do that every time especially since it’s hard to get to the power.
This really strikes me as a software issue with the latest update as absolutely nothing else has changed in my setup.
I’ve tried:
Different HDMI cables (high quality) Deep colour settings Reset the TV to factory default Different HDMI ports TV
Model: OLED65G26LA / OLED65G26LA.HFBQLWK WebOS TV Version: 8.3.0.2301 Software Version: 13.30.56 AVR & Devices
Marantz SR5015 Nvidia Shield Pro PS5
The setup is the conventional AVR installation as shown in the attached file
Has anyone else experienced this?
Is it possible to revert the software update?
-
By Roy Brown
webOS updated, I think to 2023, on my C2 a couple of days ago. Since then the News option on the Sky News app no longer works, instead timing out. The Weather and Climate options still work, though.
I have deleted and reloaded the Sky News app, but the problem remains.
Does anybody have any suggestions of what I might try to get this working again, or is this something for LG, or Sky, to fix?
-
-
By Alex
Automatic Firmware Update
Press the Home/Smart button on your remote to bring up your launcher bar.
Click the Settings icon in the top-right.
Choose the All Settings option at the bottom.
Choose the General menu from the left.
Scroll down, near the bottom of the list, and select About this TV.
From here, make sure Allow automatic updates is checked, and click the Check for updates button.
If an update is found, follow the steps on screen to download and install it.
-
-
Question
neblap
When LG released the WebOS 2 update my TV updated itself. Unfortunately my TV then developed the AV2 popup problem and was taken away by LG to replace the main board
Upon the return of my TV it was running an old firmware which I updated and is now 04.45.25
Searching for a later firmware returns "Unable to check for updates."
I rang LG customer support who advised that I download the update direct from their website, but the only listed firmware is 04.45.25.
Their only other advice was that the TV had to get used to the update before it can update to a later firmware, and that was from a supposedly Technical Support agent.
Has LG withdrawn the update? Or is "Unable to check for updates" a problem?
My TV's model number is 47LB650V-ZN
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.